EasyFeed Irrigation Fittings — Solvent-Free Connectors for Gravity-Fed Growing Systems
Best for: Growers setting up or expanding an EasyFeed system, or anyone needing reliable, nutrient-compatible irrigation connectors that won't clog
Our thoughts
These aren't fancy, but they're properly engineered. Solvent-free, British-made, and designed to work with thicker nutrient feeds without bunging up. If you're running EasyFeed or scaling a system from 4 pots to 100, these fittings are the connectors that make it all talk to each other. Straightforward kit that does the job right.
EasyFeed Irrigation Fittings are the connector components that make up the heart of the EasyFeed growing system — a British-engineered, gravity-fed irrigation solution designed to scale from small hobby setups to commercial operations. These solvent-free, push-fit connectors work with 16mm feed pipe to branch, join, and cap off your irrigation lines without the faff of glue, solvents, or special tools. They're engineered to handle nutrient solutions cleanly, not just water, which means thicker feeds and organic additives won't cause the clogging nightmare you get with standard 4mm tubing systems.
How it compares
EasyFeed Irrigation Fittings sit in a different category to budget barbed connectors and compression fittings.
-
vs. Standard barbed fittings (4mm): Wider 16mm tubing means no blockages even with nutrient feeds; solvent-free installation vs. glued joints
-
vs. Compression fittings: Easier to use, reusable, no special tools needed; faster reconfiguration if you change your setup
-
vs. Premium reusable systems: Same durability and reusability as Perma-Loc or Twist-N-Lok fittings, but integrated into a complete timer-controlled system
The real difference is the whole system thinking. EasyFeed fittings aren't just connectors — they're part of a purpose-built irrigation architecture that puts you in control of when water flows, not just how much.
Usage guidance
EasyFeed Irrigation Fittings work in a modular, gravity-fed setup where water flows from a butt down through 16mm pipe to individual pot trays via float valves.
Basic setup
Float valves fit into each pot tray with a washer and nut. Female connectors thread onto the float valve, and fittings join the main line to branch off to each valve. Use tee pieces to branch from the main row, elbows to cap off the end of a row.
Installation
Warm the end of the 16mm pipe in hot water to soften it slightly, then slide it onto the fitting — creates a strong watertight seal without any glue or solvents. Hand-tighten connectors. If you need to reconfigure later, just pull the pipe off and reseat elsewhere.
System scaling
One set of fittings works across any configuration — whether you're running 4 pots or 100. Just add more tees, elbows, and pipe as you expand. The modular design means no redesign, no waste, just add what you need.
Compatibility with nutrient feeds
Unlike standard 4mm drip systems, EasyFeed's 16mm pipe handles thicker feeds, organic nutrients, and additives without clogging. This is the fittings' biggest practical advantage — your system stays clean and reliable even when you're not using water alone.
Technical specifications
-
Pipe size: 16mm external diameter (13mm internal)
-
Connection method: Push-fit, solvent-free
-
Material: Non-toxic, non-reactive, corrosion-resistant (British manufacture)
-
Fitting types included: Tee pieces (for branching), elbows (for line ends), female connectors (for float valve threads)
-
Compatibility: Works with EasyFeed float valves, EasyFeed water timer, and standard gravity-fed irrigation setups using 16mm tubing
-
Installation: No tools required; warm pipe in hot water to soften for easy seating
Who this is for
- Growers building or expanding an EasyFeed system from 4 to 100+ pots
- Anyone switching from hand watering to automated gravity-fed irrigation
- Growers using thicker nutrient feeds or organic additives who need clog-free connectors
- Experienced growers who want scheduled control over feeding cycles, not passive float-valve watering
- Commercial or semi-commercial indoor operations needing modular, scalable irrigation
Our take
These fittings are the backbone of a system that actually puts you in control. Solvent-free, nutrient-proof, and British-made — they're reliable kit that handles real-world growing without the clogging headaches of standard systems.
If you're serious about moving beyond hand watering and want a system that scales without redesign, worth picking up as spares or as part of a full EasyFeed setup. Does exactly what it should, day in, day out.
