EasyFeed 13mm Flexi Pipe - Flexible Feed Line for EasyFeed Grow Systems
Best for: Extending or repairing the feed lines on an EasyFeed Grow System, or running new supply pipe to additional pots.
Our thoughts
Simple, does exactly what it says, and it's sold by the metre so you only buy what you actually need. If you're expanding an EasyFeed setup or need to replace a damaged length of pipe, this is the exact match rather than a generic substitute that might not seat properly in your fittings.
This is the flexible feed pipe used with the EasyFeed Grow System, an automated gravity or pump-fed watering setup for hydroponic and container growing. It has an internal diameter of 13mm and an external diameter of 16mm, matching the fittings and drippers used throughout the EasyFeed range.
Because it's sold per metre, you can buy exactly the length you need, whether that's a short repair section or enough to run feed lines out to a full row of pots. The 13mm/16mm sizing is a widely-used standard in irrigation systems, so it also fits many other drip and gravity-feed setups that use the same bore, not just EasyFeed's own components.
How it compares
Feed pipe is feed pipe, so the comparison comes down to fit and flexibility rather than brand names.
- Matches the exact bore of EasyFeed's own fittings and drippers, avoiding the loose or tight fit you can get with generic pipe of a slightly different diameter.
- The 13mm ID/16mm OD sizing is common across other drip irrigation ranges, so it's compatible with more than just EasyFeed kit if you're mixing components.
- Buying per metre works out cheaper than buying a fixed-length coil if you only need a short run.
If you're already running EasyFeed components, this is the safe, guaranteed-fit choice, if you're building a mixed system, the standard sizing means it'll likely work with your other drip fittings too.
Usage guidance
Measuring your run
Measure the distance from your header/manifold to each dripper or pot before ordering, and add a little extra for routing round obstacles rather than pulling the pipe taut.
Cutting
Cut cleanly with sharp scissors or a pipe cutter, a ragged cut can stop fittings seating properly and cause leaks.
Fitting
Push the pipe fully onto barbed fittings or drippers until it seats against the shoulder, a shallow fit is the most common cause of feed line leaks.
Routing
Avoid sharp kinks, which restrict flow, use gentle bends and secure the pipe with clips if it needs to run along a surface.
Technical specifications
- Internal diameter: 13mm
- External diameter: 16mm
- Sold as: Per metre length
- Compatible system: EasyFeed Grow System
- Material: Flexible irrigation-grade pipe
- Typical use: Feed line extension, repair, and new dripper runs
Who this is for
- Existing EasyFeed system owners extending their setup to more pots
- Anyone repairing a damaged or kinked section of feed pipe
- Growers building a drip system who need standard 13mm/16mm bore pipe
- Anyone who wants to buy exactly the length they need rather than a fixed coil
Our take
Exactly the pipe you need if you're running or expanding an EasyFeed system, no guesswork on fit, no paying for more than you need.
A small, practical purchase that keeps a working irrigation system working. Does exactly what it should, day in, day out.
