Omega Cool Wing Air-Cooled Reflector — Budget-Friendly Heat Control for Compact Grows
Best for: Growers who need heat management in tight spaces without paying full air-cooled hood prices
Our thoughts
This is a solid entry-level air-cooled reflector that bridges the gap between basic wing reflectors and expensive full hoods. If you're struggling with heat and need to mount your lamp lower without scorching plants, the Cool Wing does the job properly at a sensible price. One we recommend a lot for growers stepping up to active cooling for the first time.
The Omega Cool Wing is an air-cooled tube reflector built from high-quality hammered dimpled aluminium with a sealed clear glass tube running through the centre. Hot air gets pulled through the tube and out of your grow room, which means you can mount your lamp closer to your plants without heat stress. The reflective anodised surface is highly polished, so light bounces down evenly without hot spots. It's pre-wired with a 4-metre IEC cable, so you plug straight into your ballast — no faffing about. Simple, effective, and made for growers who want temperature control without the premium price tag.
How it compares
The Cool Wing sits in the budget-to-mid tier of air-cooled reflectors.
- More affordable than full-sized air-cooled hoods or professional sealed systems
- Smaller reflective footprint than non-air-cooled wing reflectors like Adjust-a-Wings, but superior heat control
- Requires active cooling (fan and ducting) — not a sealed passive system
- Available in three sizes (5″, 6″, 8″) to match different lamp outputs
Essentially: you're trading light spread for temperature management. If your grow room runs warm, this is the smarter choice.
Usage guidance
Air flow setup
Connect ducting to both ends of the Cool Wing using quick-release clips. Run one side to a duct fan pulling air from outside, the other side venting hot air out of the room. The cooler the intake air, the cooler your lamp runs.
Lamp positioning
Because heat is being actively pulled away, you can mount the lamp 30–50cm closer to canopy than you would with a non-cooled reflector. This means more light at plant level without leaf burn.
Tent or room mounting
Hang vertically in a tent or horizontally over a bench. Hanging hooks are included. Works with HPS and Metal Halide lamps from 250W–1000W using E40 fittings.
Compact spaces
The sealed glass tube design is narrower than full air-cooled hoods, making it well-suited to small tents or wardrobes where footprint matters.
Technical specifications
- Construction: Hammered dimpled aluminium, anodised finish
- Reflective surface: Highly polished, fully sealed clear glass tube
- Available sizes: 5″ (125mm), 6″ (150mm), 8″ (200mm)
- Compatible lamp types: HPS and Metal Halide, E40 fitting
- Lamp range: 250W–1000W
- Cable: Pre-wired 4-metre IEC connector, ready to plug into ballast
- Features: Detachable wings, hanging hooks included
- Certification: CE marked and RoHS approved
Who this is for
- First-time growers stepping up to active cooling without buying a full sealed hood
- Growers running small tents or compact spaces where temperature is the main problem
- Anyone who's struggled mounting lamps close enough and needs heat management to solve it
- Budget-conscious setups where every saving counts but quality can't slip
- Growers replacing a basic reflector and want to control summer heat without overcomplicating things
Our take
This is a proper air-cooled reflector at a price that doesn't require a second mortgage. It does what it's supposed to — keeps lamps cool and lets you mount lower — without the complexity of full sealed systems or the cost of premium brands.
Good time to buy while stock lasts. If heat's been holding you back, worth picking up.
```
