{"title":"Grow Light Cables \u0026 Accessories","description":"","products":[{"product_id":"omega-5m-iec-extension-lead","title":"Omega 5m iec Extension Lead","description":"\u003csection class=\"gh-product-listing\"\u003e\n\n\u003ch2\u003eOmega 5m IEC Extension Lead — Flexible Ballast Placement for Grow Rooms\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e Growers who need to separate ballasts from reflectors and want proper cable length without the premium price\u003c\/p\u003e\n\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003e\nA solid, straightforward bit of kit. If you're running IEC ballasts up to 600w and need to move your ballast away from the tent—which is a smart move for heat management—this does the job. Locking connectors, proper rating, and it plays nicely with the Omega ecosystem. One we sell regularly to growers setting up proper layouts.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eThe Omega 5m IEC Extension Lead is a \u003cstrong\u003e10-amp rated cable\u003c\/strong\u003e designed to extend the distance between your ballast and reflector by 5 metres. It features a secure \u003cstrong\u003elocking female IEC connector\u003c\/strong\u003e at one end and a male plug at the other, compatible with all IEC reflectors and ballasts up to 600w. Simple, reliable, and built to let you place your ballast outside the tent where it belongs—away from heat, away from moisture, out of harm's way.\u003c\/p\u003e\n\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eThis sits in the \u003cstrong\u003epractical mid-tier\u003c\/strong\u003e of IEC extension leads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProper 10-amp rating—not undersized or questionable\u003c\/li\u003e\n\u003cli\u003eLocking connectors that actually stay put, unlike cheap push-fit alternatives\u003c\/li\u003e\n\u003cli\u003e5 metres gives genuine flexibility without needing multiple cables\u003c\/li\u003e\n\u003cli\u003eWorks across the full Omega ballast and reflector range\u003c\/li\u003e\n\u003cli\u003eSignificantly better value than premium branded alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGeneric IEC leads exist cheaper, but you're betting on connector quality. This one's built to last.\u003c\/p\u003e\n\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBallast separation\u003c\/strong\u003e\u003cbr\u003e\nDisconnect your reflector from the ballast. Connect the locking female plug on the extension lead to the male plug on your reflector cable. Insert the male plug on the extension lead into the female connector on your ballast. Ensure all connections are snug and fully seated.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHeat management\u003c\/strong\u003e\u003cbr\u003e\nMoving your ballast outside the tent is one of the smartest moves in summer growing. Ballasts generate serious heat, and pushing that outside the grow space keeps temperatures controlled and your plants happier. 5 metres gives you real flexibility in room layout.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCable runs\u003c\/strong\u003e\u003cbr\u003e\nMost ballasts can ignite lamps at distances up to 15 metres, so this lead slots comfortably into standard setups. Route the cable safely—secure it away from foot traffic and moisture where possible.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: \u003cstrong\u003e5 metres\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmperage rating: \u003cstrong\u003e10 amps\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnector type: \u003cstrong\u003eIEC male to locking IEC female\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable colour: \u003cstrong\u003eBlack\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatibility: \u003cstrong\u003eAll IEC reflectors and ballasts up to 600w\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum safe ballast-to-lamp distance: \u003cstrong\u003eup to 15 metres with compatible ballasts\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowers running IEC-compatible ballasts and reflectors (Omega or compatible brands)\u003c\/li\u003e\n\u003cli\u003eAnyone looking to move ballasts outside their grow tent for better heat control\u003c\/li\u003e\n\u003cli\u003eLarger grow rooms where standard reflector cables fall short\u003c\/li\u003e\n\u003cli\u003eGrowers wanting a reliable, properly-rated extension without paying premium prices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eThis is exactly what an IEC extension lead should be—rated properly, built to last, and priced sensibly. Ballast separation is one of those moves that makes a real difference in summer, and this cable makes it actually feasible.\u003c\/p\u003e\n\u003cp\u003eWorth picking up while clearance stock lasts. Does exactly what it should, day in, day out.\u003c\/p\u003e\n\n\u003c\/section\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":42568616050858,"sku":"88970","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/5540\/5400\/products\/HYD-2431.jpg?v=1645304888"},{"product_id":"masterplug-4-socket-13a-open-reel","title":"Masterplug 4 Socket 13A Open Reel","description":"\u003csection class=\"gh-product-listing\"\u003e\n\n\u003ch2\u003eMasterplug 4 Socket 13A Open Reel — Extra Sockets for Growing Spaces Without Mains Reach\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e Growers with larger spaces or distant equipment that needs powering from a single wall socket\u003c\/p\u003e\n\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003e\nLimited mains outlets kill productivity. This open reel cuts through that problem cleanly — four sockets and up to 30 metres of cable length means you can power your lights, fans, controllers, and sensors without daisy-chaining leads or running extension cables all over the place. Sturdy, reliable, and built to handle the job without faffing about.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eThe Masterplug 4 Socket 13A Open Reel is a heavy-duty extension cable reel that solves a simple but critical problem: \u003cstrong\u003etoo few mains outlets in growing spaces\u003c\/strong\u003e. It delivers four safety-shuttered UK sockets at the end of 25–30 metres of cable, giving you genuine flexibility to position equipment where it needs to be, not where your mains socket happens to be. Built around a steel frame with a wind handle for easy retraction, it's designed for regular use in spaces where reaching from a single outlet would otherwise mean compromise.\u003c\/p\u003e\n\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eThis sits in the \u003cstrong\u003eprofessional-grade extension reel\u003c\/strong\u003e bracket for UK growing setups.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour sockets vs. competitors offering two or three — more flexibility per lead\u003c\/li\u003e\n\u003cli\u003e13A capacity with integrated RCD and thermal overload protection — proper safety, not bargain-basement cutoffs\u003c\/li\u003e\n\u003cli\u003eSteel frame design stands up to daily movement and storage in workshop conditions\u003c\/li\u003e\n\u003cli\u003eEstablished brand with 30+ years in power distribution — you're not buying a gamble\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe research shows growers specifically ask for this specification because it covers multiple pieces of equipment (lights, fans, controllers, sensors) without multiplying the number of extension leads.\u003c\/p\u003e\n\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePower distribution in grow rooms\u003c\/strong\u003e\u003cbr\u003e\nPlug into your main outlet, run the cable to where your equipment sits, and you've got four dedicated sockets right there. No more running five separate leads across the floor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquipment setup\u003c\/strong\u003e\u003cbr\u003e\nRun your LED grow light driver, circulation fan, controller, and sensor power supplies all from one reel. Keeps the mess minimal and makes troubleshooting straightforward.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLarger spaces\u003c\/strong\u003e\u003cbr\u003e\n25–30 metres of cable gives you genuine reach. Useful for greenhouses, polytunnels, or rooms where the socket's stuck in an awkward corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable management\u003c\/strong\u003e\u003cbr\u003e\nThe wind handle lets you reel in only what you need — no coils lying about. When fully extended, keep the cable taut to avoid tripping hazards.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSocket capacity: \u003cstrong\u003e4 × 13A safety-shuttered UK sockets\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltage: \u003cstrong\u003e240V\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable length: \u003cstrong\u003e25m or 30m (depending on variant)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower rating: \u003cstrong\u003e1560W maximum\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSafety features: \u003cstrong\u003eIntegrated RCD (residual current device), thermal overload cut-out, safety shuttered sockets\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrame: \u003cstrong\u003eSteel, freestanding\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable management: \u003cstrong\u003eWind-up handle for easy retraction\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: \u003cstrong\u003eApproximately 270 × 230 × 230mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowers with growing spaces larger than a single room or reach of standard extension leads\u003c\/li\u003e\n\u003cli\u003eAnyone running multiple pieces of equipment that all need powering simultaneously\u003c\/li\u003e\n\u003cli\u003eSetups where safety and proper electrical protection matter (commercial or semi-commercial operations)\u003c\/li\u003e\n\u003cli\u003eGrowers who value durability and don't want to replace cheap reels every season\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBest suited to anyone tired of crawling extension leads across the floor or unplugging equipment just to plug in something else.\u003c\/p\u003e\n\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eThis is straightforward kit that does one job properly — gets power where it needs to go without creating a mess or cutting corners on safety. Four sockets, 25–30 metres of reach, and proper RCD protection. No surprises, no overcomplication.\u003c\/p\u003e\n\u003cp\u003eIf your growing space is currently held back by mains outlet placement, worth picking up while clearance stock lasts. Masterplug are solid on longevity, so this should see you through several seasons without drama.\u003c\/p\u003e\n\n\u003c\/section\u003e","brand":"Masterplug","offers":[{"title":"25M + RCD","offer_id":42568699609258,"sku":"811377","price":34.72,"currency_code":"GBP","in_stock":false},{"title":"30M Open Reel","offer_id":42568699642026,"sku":"811378","price":29.43,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/5540\/5400\/products\/HYV-0520.jpg?v=1645300648"},{"product_id":"lumatek-led-extension-power-cable-5m","title":"Lumatek LED Extension Power Cable 5m","description":"\u003csection class=\"gh-product-listing\"\u003e\n\n\u003ch2\u003eLumatek LED Extension Power Cable 5m - Move Your Driver Further From the Fixture\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e growers who want to mount a Lumatek LED driver away from the light fixture itself, keeping its weight and heat out of the grow space.\u003c\/p\u003e\n\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003e\nDrivers get warm and add weight right where you're trying to hang a light, so moving one out of the tent entirely is a smart move if your setup allows for it. This gives you the extra 5 metres of reach to do that properly, with connectors built to match Lumatek's own driver and fixture standard rather than a generic splice job.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eThe Lumatek LED Extension Power Cable extends the distance between a Lumatek LED driver and its fixture by 5 metres, letting you mount the driver remotely rather than having it hang alongside the light itself. The set includes two 5m cables: one extension power cable and one extension dimming cable, so both power delivery and dimming control are covered when you relocate the driver.\u003c\/p\u003e\n\n\u003cp\u003eIt uses Lumatek's own M19-2 self-locking male and female connectors, matching the standard plug on the driver and fixture rather than an aftermarket splice, and is wired with UL-rated SJTW 2x16AWG cable rated to 300V and 105°C. It's IP65 rated and RoHS compliant, with a working temperature range of -20°C to 105°C, so it holds up in a range of grow room conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eExtension cables for LED grow lights aren't all built to the same standard.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeneric extension leads from non-Lumatek suppliers may not use the same M19-2 connector, meaning they won't plug straight into a Lumatek driver or fixture without adapting.\u003c\/li\u003e\n\u003cli\u003eRunning the driver right next to the fixture avoids buying an extension cable at all, but keeps the driver's heat and bulk inside the grow space rather than moved out of it.\u003c\/li\u003e\n\u003cli\u003eSplicing a longer cable yourself is possible but loses the IP65 rating and factory-tested insulation this pre-made cable comes with.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor a straightforward, properly rated way to relocate a Lumatek driver without voiding its build quality, this is the sensible option over an improvised extension.\u003c\/p\u003e\n\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\u003cp\u003eThis is a simple plug-and-play accessory, but a couple of things are worth knowing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003cbr\u003eUse it when you want to mount the driver outside the tent or away from the fixture, reducing heat and weight in the grow space itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting both cables\u003c\/strong\u003e\u003cbr\u003eRun both the power and dimming extension cables together if your driver setup uses dimming control, they're supplied as a pair for that reason.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable routing\u003c\/strong\u003e\u003cbr\u003eRoute the cable away from areas where it could be pulled, trodden on or pinched, particularly where it exits the tent.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtension length: \u003cstrong\u003e5m (power cable and dimming cable)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnector type: \u003cstrong\u003eM19-2 self-locking male\/female\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable rating: \u003cstrong\u003eUL SJTW 2x16AWG, 300V, 105°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWithstand voltage: \u003cstrong\u003e500VAC, 2mA, 3s test, no breakdown\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eInsulation resistance: \u003cstrong\u003e100MΩ@100V\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorking temperature: \u003cstrong\u003e-20°C to 105°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWaterproof rating: \u003cstrong\u003eIP65\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompliance: \u003cstrong\u003eRoHS\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLumatek LED fixture owners wanting to move the driver outside the tent\u003c\/li\u003e\n\u003cli\u003eGrowers reducing in-tent heat and bulk from driver units\u003c\/li\u003e\n\u003cli\u003eAnyone extending reach in a larger room without compromising cable rating\u003c\/li\u003e\n\u003cli\u003eGrowers who want a factory-matched connector rather than an improvised splice\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eIt's a simple accessory, but it's built to the same standard as the fixture it's extending, which matters when you're dealing with mains power in a humid environment. If your setup would benefit from the driver being further away, this is the properly-rated way to do it.\u003c\/p\u003e\n\u003cp\u003eDoes exactly what it should, day in, day out, a sensible add-on for anyone repositioning their Lumatek driver.\u003c\/p\u003e\n\n\u003c\/section\u003e","brand":"LUMATEK","offers":[{"title":"Default Title","offer_id":47915789484202,"sku":"5583","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/5540\/5400\/files\/5mLumatekLEDExtensionPowerCable.jpg?v=1769180933"},{"product_id":"3-pin-uk-fused-plug","title":"3 Pin Uk Fused Plug","description":"\u003csection class=\"gh-product-listing\"\u003e\n\n\u003ch2\u003e3 Pin UK Fused Plug - BS 1363 Rewirable Mains Plug\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e replacing a damaged plug on grow room equipment or wiring up a custom lead to UK electrical standards.\u003c\/p\u003e\n\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003e\nThe old listing for this one had been mixed up with a fan controller's description, talking about airflow performance on a plug - obviously wrong, so we've corrected it to what this actually is. Every grow room ends up with a damaged plug eventually, whether it's from a knock, wear, or a DIY lead, and this is the cheap fix. Gets the job done properly.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eThis is a standard 3-pin UK mains plug, built to BS 1363 - the British Standard covering plugs and socket outlets in the UK, rated up to 250V and 13A. It's a rewirable design with a replaceable cartridge fuse, two rectangular pins for live and neutral and a larger earth pin above them, matching the layout of every standard UK wall socket.\u003c\/p\u003e\n\n\u003cp\u003eIt's designed for replacing a damaged or worn plug on ballasts, fans, extension leads or any other mains-powered grow room equipment, or for wiring up a custom lead from scratch. It's easy to wire and robust enough for everyday use around a grow space.\u003c\/p\u003e\n\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eUK mains plugs are a standardised, regulated part - the differences between brands come down to build quality and fuse handling rather than features.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRewirable design, unlike moulded plugs that can't be repaired and have to be cut off and replaced entirely if damaged\u003c\/li\u003e\n\u003cli\u003eBS 1363 compliant, matching the required standard for any UK mains-connected equipment\u003c\/li\u003e\n\u003cli\u003eTakes a standard BS 1362 cartridge fuse, so replacement fuses are available from any hardware or electrical supplier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere's no meaningful upgrade path for a plug like this - it either meets the standard or it doesn't, and this does.\u003c\/p\u003e\n\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003cbr\u003eConnect live (brown) to the fused terminal, neutral (blue) to the terminal marked N, and earth (green\/yellow) to the earth pin, following the wiring diagram inside the plug body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuse selection\u003c\/strong\u003e\u003cbr\u003eFit a fuse rated appropriately for the equipment being connected - lower-draw devices should use a lower-rated fuse rather than the higher-rated fuse plugs are sometimes supplied with as standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003cbr\u003eMake sure the cable is properly clamped inside the plug body before closing it up, so strain on the lead doesn't pull the wiring loose over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacing a damaged plug\u003c\/strong\u003e\u003cbr\u003eCut back to sound cable, strip the wires cleanly, and wire into the new plug rather than trying to repair a cracked or damaged plug body.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStandard: \u003cstrong\u003eBS 1363\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePin configuration: \u003cstrong\u003e3-pin, UK Type G\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRated voltage\/current: \u003cstrong\u003eup to 250V, 13A\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: \u003cstrong\u003erewirable, with replaceable BS 1362 cartridge fuse\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse case: \u003cstrong\u003ereplacing damaged plugs, wiring custom leads\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowers replacing a damaged or worn plug on ballasts, fans or extension leads\u003c\/li\u003e\n\u003cli\u003eAnyone wiring a custom lead for grow room equipment\u003c\/li\u003e\n\u003cli\u003eElectricians and competent DIYers working on UK mains equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eThere's no reason to run equipment on a cracked or dodgy plug when the fix costs this little. A rewirable BS 1363 plug is a five-minute job and covers you properly for UK mains safety standards.\u003c\/p\u003e\n\u003cp\u003eWorth picking up if you want equipment you can rely on.\u003c\/p\u003e\n\n\u003c\/section\u003e","brand":"MISC","offers":[{"title":"Default Title","offer_id":47915982979242,"sku":"82252","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/5540\/5400\/files\/82252_3_pin_uk_fused_plug.jpg?v=1769185280"},{"product_id":"mains-cable-2m-moulded-5-amp-plug-to-female-iec-plug","title":"Mains Cable 2m - Moulded 5 Amp Plug to Female IEC Plug","description":"\u003csection class=\"gh-product-listing\"\u003e\n\n\u003ch2\u003eMains Cable 2m - Moulded 5 Amp Plug to Female IEC Plug - Connects Ballasts to 5A Sockets\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e growers whose lighting contactor or timer box feeds power through 5A round-pin sockets and need to connect that to a ballast, reflector or fan's IEC input.\u003c\/p\u003e\n\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003e\nThis one trips people up because it's not a standard UK 13A plug, it's a 5A round-pin plug, the kind you get on lighting contactor boxes that split a room's supply into separate switched circuits. If your gear's IEC-ended and your socket's the round 5A type, this is the cable you need.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eThis is a 2 metre mains cable with a moulded BS546 5 Amp round-pin plug on one end and a female IEC (kettle-type) socket on the other. It's designed to feed power from a 5A round-pin socket, commonly found on lighting contactor units and timer boxes used to split a grow room's lighting circuit into separately switched outlets, into equipment with a standard IEC power input such as ballasts, reflectors with built-in ballasts, and some fans.\u003c\/p\u003e\n\n\u003cp\u003eBecause contactor and timer boxes often use 5A round-pin sockets rather than standard 13A UK sockets (partly to prevent mismatched or overloaded equipment being plugged in), a standard 13A-to-IEC lead won't fit. This cable bridges that specific gap with a proper moulded connection rather than an adapter bodge.\u003c\/p\u003e\n\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eGetting power from a contactor box to your lighting equipment has a few possible routes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 13A-to-IEC leads are more common and cheaper but physically won't plug into a 5A round-pin socket, so they're not an option on contactor-fed circuits.\u003c\/li\u003e\n\u003cli\u003eCutting and rewiring your own cable to fit is possible but carries real safety risk compared to a properly moulded, tested lead.\u003c\/li\u003e\n\u003cli\u003eA 5m IEC extension cable serves a different purpose, extending reach between two IEC-ended devices, rather than converting between plug types the way this cable does.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor a straightforward, safe way to connect 5A round-pin contactor sockets to IEC-ended grow equipment, a properly moulded cable like this is the sensible choice over improvising.\u003c\/p\u003e\n\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\u003cp\u003eUsing this cable is simple, but check your equipment matches first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck your socket type\u003c\/strong\u003e\u003cbr\u003eConfirm your contactor or timer box uses 5A round-pin (BS546) sockets rather than standard 13A sockets before buying, they look different and aren't interchangeable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck your equipment's input\u003c\/strong\u003e\u003cbr\u003eConfirm your ballast, reflector or fan has a female IEC-style input (the same shape as a kettle plug) for this cable's other end to connect to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable routing\u003c\/strong\u003e\u003cbr\u003eRoute the 2m length so it isn't strained, kinked, or run through areas where it could be trodden on or caught.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlug type: \u003cstrong\u003eBS546 5 Amp round-pin (moulded)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOther end: \u003cstrong\u003eFemale IEC (C13\/kettle-type) socket\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable length: \u003cstrong\u003e2 metres\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse case: \u003cstrong\u003eConnecting 5A contactor\/timer sockets to IEC-ended equipment\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowers using a lighting contactor or timer box with 5A round-pin sockets\u003c\/li\u003e\n\u003cli\u003eAnyone connecting a ballast, reflector or fan with an IEC input to that kind of socket\u003c\/li\u003e\n\u003cli\u003eGrowers replacing a damaged or missing lead on existing kit\u003c\/li\u003e\n\u003cli\u003eMulti-light setups running several fixtures off a split contactor circuit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eA cheap, easy fix for a compatibility gap that catches a lot of growers out when they first wire up a contactor box. Check your socket and plug types match before ordering, and this sorts the connection properly.\u003c\/p\u003e\n\u003cp\u003eDoes exactly what it should, day in, day out, a small but necessary bit of kit for contactor-fed lighting setups.\u003c\/p\u003e\n\n\u003c\/section\u003e","brand":"MISC","offers":[{"title":"Default Title","offer_id":47915986583722,"sku":"82258","price":4.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/5540\/5400\/files\/82258.jpg?v=1769185406"},{"product_id":"maxibright-daylight-cables","title":"Maxibright Daylight Cables","description":"\u003csection class=\"gh-product-listing\"\u003e\n\u003ch2\u003eMaxibright Daylight Cables — LED to LED Daisy Chain \u0026amp; Controller Signal Cables\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e Growers running multiple Maxibright Daylight LED fixtures who need to control them from one dimmer or the Daylight Controller\u003c\/p\u003e\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003eIf you're scaling up to multiple Maxibright LEDs, these cables are not optional—they're the backbone of your setup. The iLink connectors are rock solid, the daisy chain architecture lets you link up to 100 fixtures if you need to, and they solve the real problem: positioning lights where they need to be, not where the socket is. One we recommend to anyone running more than one Daylight unit.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eMaxibright Daylight Cables are \u003cstrong\u003esignal control cables\u003c\/strong\u003e that link your Maxibright Daylight LED fixtures to a Maxibright Daylight Lighting Controller, allowing you to dim and control multiple lights from a single point. Available in controller and LED-to-LED daisy chain options, these cables give you the flexibility to position your fixtures anywhere in your grow space without compromising control. Whether you're running two lights or ten, these are what make multi-fixture setups actually work.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eMaxibright's iLink cable system sits in the \u003cstrong\u003emid-market tier\u003c\/strong\u003e of multi-fixture LED control solutions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary self-locking connectors ensure reliable signal transfer and prevent accidental disconnection\u003c\/li\u003e\n\u003cli\u003eCapable of linking up to 100 fixtures in a daisy chain (vs competitors like SANlight limited to 4-unit distribution blocks)\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple lengths (2m and 5m options) for different space layouts\u003c\/li\u003e\n\u003cli\u003eSignificantly cheaper than integrated distribution block systems, but requires compatible Maxibright fixtures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn real terms: you're getting proper multi-fixture control at a fraction of what you'd pay for fancy distribution architecture.\u003c\/p\u003e\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\u003cp\u003eMaxibright Daylight Cables work in a straightforward chain setup:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle fixture with controller\u003c\/strong\u003e\u003cbr\u003eConnect the controller to your first Daylight LED using the controller cable (typically supplied with the Daylight Lighting Controller). Set your dimming levels from the controller unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMultiple fixtures (2 or more)\u003c\/strong\u003e\u003cbr\u003eConnect the first LED to the controller using the controller cable. Then daisy chain additional LEDs together using the LED-to-LED cables, connecting the Signal Out port on one fixture to the Signal In port on the next. All lights will respond to the controller's dimming commands simultaneously.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFixture repositioning\u003c\/strong\u003e\u003cbr\u003eThe main advantage: you can now position each LED exactly where it needs to be in your tent or room, rather than being limited by power socket location or controller distance. Use the cable length that suits your layout (2m for compact setups, 5m for larger spaces or awkward positioning).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower requirements\u003c\/strong\u003e\u003cbr\u003eThese are signal cables only—they carry dimming data, not power. Your fixtures still need their own power connections. Use power cable extensions if you need to move a fixture away from a socket.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable type:\u003c\/strong\u003e iLink data signal cables (not power cables)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Self-locking male (Signal Out) and female (Signal In) plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable lengths:\u003c\/strong\u003e 2 metres and 5 metres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaisy chain capacity:\u003c\/strong\u003e Up to 100 LED units can be linked via a single controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Maxibright Daylight 200W, 300W, 480W, and 660W fixtures (2020 onwards and Pro versions)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCritical note:\u003c\/strong\u003e NOT compatible with 2019 Daylight 660W (V1 original model)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowers scaling from one Maxibright Daylight LED to multiple units\u003c\/li\u003e\n\u003cli\u003eAnyone running a multi-fixture setup who wants centralised dimming control\u003c\/li\u003e\n\u003cli\u003eGrowers with awkward grow space layouts where socket positioning limits light placement\u003c\/li\u003e\n\u003cli\u003eFacilities planning to expand fixture numbers without adding controllers\u003c\/li\u003e\n\u003cli\u003eExisting Maxibright Daylight owners upgrading from single-unit setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParticularly essential if you own more than one Daylight fixture—you'll need one controller cable and one daisy chain cable for every additional light beyond the first.\u003c\/p\u003e\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eThese cables are not an upgrade—they're a necessity if you want to run multiple Maxibright Daylight LEDs properly. The iLink connectors are reliable, the cable lengths give you real flexibility, and the ability to daisy chain up to 100 units means you're not locked into small setups.\u003c\/p\u003e\n\u003cp\u003eIf you're thinking about adding a second or third Daylight fixture, sort the cables at the same time. Takes the guesswork out of installation and means your lights end up exactly where they need to be, not where the socket is. Worth picking up while stock lasts.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"MAXIBRIGHT","offers":[{"title":"2m Daisy Chain","offer_id":47916141215914,"sku":"10026","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"5m Controller Cable","offer_id":47916141248682,"sku":"10083","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"5m Power Cable Extension","offer_id":47916141281450,"sku":"10086","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/5540\/5400\/files\/10026.jpg?v=1769188361"},{"product_id":"lumatek-30w-supplemental-uv-far-red-daisy-chain-cable-1-5-metre","title":"Lumatek 30W Supplemental UV + Far Red Daisy Chain Cable (1.5 Metre)","description":"\u003csection class=\"gh-product-listing\"\u003e\n\u003ch2\u003eLumatek 30W Supplemental UV Daisy Chain Cable (1.5 Metre) — Essential Connector for Multi-Bar Setups\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e Growers running multiple Lumatek 30W UV supplemental bars who want clean wiring and single-point control\u003c\/p\u003e\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003eIf you're serious about UV supplemental lighting, you're likely running two bars per Zeus fixture — which means you need this cable. Simple plug-and-play connector that tidies up your rig and lets you power multiple bars from one source. One less thing to overcomplicate.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Lumatek 30W Supplemental UV Daisy Chain Cable is a \u003cstrong\u003e1.5 metre connection lead\u003c\/strong\u003e designed to link multiple Lumatek 30W UV supplemental LED bars in series. Instead of running separate power lines and controllers for each bar, you plug them together and operate from a single power source. It's straightforward kit that reduces cable clutter and simplifies your grow room layout without any fuss.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eThis sits in a specific role — it's not a standalone light, it's the connector that makes multi-bar UV setups practical.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDaisy chain approach beats running individual power cables (cleaner, fewer controllers needed)\u003c\/li\u003e\n\u003cli\u003eProprietary Lumatek design — guaranteed compatibility with 30W UV bars, no guessing\u003c\/li\u003e\n\u003cli\u003e1.5 metres gives you flexibility for strategic bar placement across your canopy\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation — no soldering, no faffing about\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn real terms, this is the accessory that makes running two UV bars (the Lumatek-recommended setup per fixture) actually manageable.\u003c\/p\u003e\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\u003cp\u003eThis cable is designed specifically for linking Lumatek 30W UV supplemental bars:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic setup\u003c\/strong\u003e\u003cbr\u003eConnect one bar to your power source, then plug the second bar into this cable. That's it. Both bars run from one controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-bar deployments\u003c\/strong\u003e\u003cbr\u003eLumatek recommend mounting two UV bars per Zeus fixture for full coverage. This cable makes that setup clean and manageable — no rat's nest of separate leads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable routing\u003c\/strong\u003e\u003cbr\u003eThe 1.5 metre length is enough to route bars strategically across your canopy while keeping the main lead tidy. Plan your runs before you clip it down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUV protocol\u003c\/strong\u003e\u003cbr\u003eOnce wired, UV exposure should be increased gradually — 15 minutes every two days — while you watch for leaf stress. Start low, work up to your sweet spot (typically 2-6 hours daily in grow tents, up to 12 hours in larger rooms). UV is powerful; respect it.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: \u003cstrong\u003e1.5 metres\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: \u003cstrong\u003e0.10 kg\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatibility: \u003cstrong\u003eLumatek 30W Supplemental UVA\/UVB LED bars\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnection type: \u003cstrong\u003ePlug-and-play daisy chain connector\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation: \u003cstrong\u003eNo tools required\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssociated 30W UV Bar Output:\u003c\/strong\u003e UVA (315-400 nm) at 1200 mW, UVB (280-315 nm) at 100 mW\u003c\/p\u003e\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowers running multiple Lumatek 30W UV bars in a single space\u003c\/li\u003e\n\u003cli\u003eAnyone using Zeus fixtures (which Lumatek recommend pairing with two UV bars per unit)\u003c\/li\u003e\n\u003cli\u003eGrowers who want to add UV supplemental lighting without tangling themselves in cables\u003c\/li\u003e\n\u003cli\u003eOperators scaling UV setups and adding bars incrementally\u003c\/li\u003e\n\u003cli\u003eAnyone investing in supplemental UV to boost plant quality during flowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEssential for growers serious about supplemental UV, pointless for single-bar setups.\u003c\/p\u003e\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eThis is a simple, unglamorous cable that does exactly one job — connect your bars cleanly. If you're buying a Lumatek 30W UV bar and planning to run two per fixture (which is the sensible approach), you need one of these. Don't run separate power lines when a daisy chain sorts it properly.\u003c\/p\u003e\n\u003cp\u003eWorth picking up alongside your UV bars. Stock clearance-priced, so good time to grab one while it's available.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"LUMATEK","offers":[{"title":"Default Title","offer_id":47916376850602,"sku":"92774","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/5540\/5400\/files\/1.5muvbardaisychaincable_65858468-4783-47f6-9aa4-78ffd47fd35b.jpg?v=1769192783"},{"product_id":"lumatek-30w-uv-and-far-red-power-cable-4-metre","title":"Lumatek 30W UV and Far Red Power Cable (4 Metre)","description":"\u003csection class=\"gh-product-listing\"\u003e\n\u003ch2\u003eLumatek 30W UV Power Cable (4 Metre) — Supplemental UV Lighting Accessory for Zeus Fixtures\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e Growers running Lumatek Zeus fixtures who need a reliable power cable for 30W UV supplemental LED bars\u003c\/p\u003e\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003eIf you're adding UV supplementation to a Zeus setup, this cable does exactly what it should — connects cleanly, reaches properly, and lets you position your UV bar where it needs to be. Four metres is enough slack for most grow room layouts without the mess of excess cable.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Lumatek 30W UV Power Cable is a purpose-built accessory that connects your Lumatek 30W UV supplemental LED bar to mains power (220\/240v). Featuring M12 3-pin connectors with Schuko connection, it's designed for the Zeus fixture ecosystem and ships at four metres — enough reach for flexible positioning without overcomplicating your setup. This is professional-grade lighting accessory kit, straightforward and built to last.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eThis is a specification-matched cable for Lumatek's UV supplemental system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose-built for Zeus fixtures — no compatibility guessing\u003c\/li\u003e\n\u003cli\u003eHeavy-duty M12 connectors rated for professional use\u003c\/li\u003e\n\u003cli\u003eFour metres gives you genuine flexibility; longer than most generic grow light cables\u003c\/li\u003e\n\u003cli\u003eLumatek backing — professional pedigree, backed by a 5-year warranty on the ecosystem\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're building a Lumatek system, this is the cable to use. It's not the cheapest generic option, but it fits the job properly.\u003c\/p\u003e\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\u003cp\u003eThis cable powers your Lumatek 30W UV supplemental LED bar across the flowering stage of your growing cycle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eUnscrew the protective cap on the male connector end. Push firmly into the female socket on your UV LED bar until it seats completely. The four-metre length gives you space to run the cable neatly alongside your main light cables or tuck it along the grow frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTiming and placement\u003c\/strong\u003e\u003cbr\u003eUV supplementation works best during flowering, starting at least four weeks before harvest. Position your UV bar using the cable length to achieve even coverage across your canopy — typically one to three UV bars per Zeus fixture depending on the model (300W to 1000W+).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower requirements\u003c\/strong\u003e\u003cbr\u003eRuns on standard 220\/240v UK mains. The integrated power supply in the LED bar handles voltage regulation. Turn off power before installation or maintenance.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: \u003cstrong\u003e4 metres\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltage rating: \u003cstrong\u003e220\/240v AC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnector type: \u003cstrong\u003eM12 3-pin with Schuko connection\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: \u003cstrong\u003e0.30 kg\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUV output (bar specification): \u003cstrong\u003e100mW UV-B, 12000mW UVA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUV spectrum: \u003cstrong\u003e280–400 nm (UVA and UVB, no UV-C)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDaily output (12-hour cycle): \u003cstrong\u003e2.2 kJ UV-B, 518 kJ UVA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatibility: \u003cstrong\u003eLumatek 30W UV LED bar and Zeus fixture range\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowers running Lumatek Zeus fixtures who want to add UV supplementation\u003c\/li\u003e\n\u003cli\u003eAnyone expanding an existing Zeus system with supplemental lighting bars\u003c\/li\u003e\n\u003cli\u003eExperienced growers looking to enhance secondary metabolite production during flowering\u003c\/li\u003e\n\u003cli\u003eProfessional or commercial operations using modular Lumatek systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis works best if you already understand what UV supplementation does and have a Zeus fixture to connect it to. It's not an entry-level product — it's a professional accessory for a professional lighting system.\u003c\/p\u003e\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eThis is a proper cable for a proper system. Lumatek knows what they're doing with professional lighting, and this cable is built to match that standard. If you're running Zeus and want to add UV bars, this is the right choice — it fits, it works, and it's backed by people who've been in the game since 2004.\u003c\/p\u003e\n\u003cp\u003eGood time to buy if you're scaling up your Zeus setup. One cable connects one bar; daisy-chain cables are sold separately if you're running multiple units.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"LUMATEK","offers":[{"title":"Default Title","offer_id":47916377178282,"sku":"92773","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/5540\/5400\/files\/LumatekUVLEDLightBarPowerCable_UK__jpeg_9447fffe-fb71-47aa-a68c-454ba4476a4e.jpg?v=1769192789"},{"product_id":"g-a-s-digital-ec-fan-cables","title":"G.A.S Digital EC Fan Cables","description":"\u003csection class=\"gh-product-listing\"\u003e\n\n\u003ch2\u003eG.A.S Digital EC Fan Cables — Control Cables for Vector EC and Hyper Fan Digital Extraction Systems\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e Growers connecting digital fans to speed controllers without guessing which cable goes where\u003c\/p\u003e\n\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003e\nThese are the connective tissue between your digital fan and your controller. Sounds simple, but active vs. non-active cables catch people out. G.A.S makes the full range, which means you can actually match the right cable to your setup instead of bodging it. One we recommend a lot when growers are building digital extraction systems.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eG.A.S Digital EC Fan Cables are \u003cstrong\u003elow-voltage control cables\u003c\/strong\u003e that connect your digital fans directly to your fan speed controller. These aren't power cables—they transmit the digital signal that tells your fan how fast to spin. They come in several configurations depending on whether you're running one fan, two fans, or need to extend the run between your controller and extraction point.\u003c\/p\u003e\n\n\u003cp\u003eThe catch that trips most growers up: not all EC fan cables are the same. Active cables carry power from the fan to the controller, meaning you need fewer plugs in the grow room. Non-active cables just move the signal, which means your controller needs its own mains power supply. Pick the wrong type and your system either won't power up or you'll be running extra cables you don't need.\u003c\/p\u003e\n\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eG.A.S cables are the OEM standard for Vector EC and Hyper Fan systems in the UK.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActive cables work with almost any controller setup, including those powered through the fan itself (like the EC1)\u003c\/li\u003e\n\u003cli\u003eNon-active cables cost less but require your controller to have its own mains connection\u003c\/li\u003e\n\u003cli\u003eY-splitter options let you run two fans from one controller socket without daisy-chaining\u003c\/li\u003e\n\u003cli\u003eProper industrial connectors—not generic PC cables that won't survive humid grow room conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompetitors like Can-Fan and Rhino make decent controllers, but G.A.S has the cable ecosystem down to a fine art. You get options instead of compromises.\u003c\/p\u003e\n\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eSingle fan setup\u003c\/strong\u003e\u003cbr\u003e\nConnect your Vector EC or Hyper Fan to your controller using a male-to-male cable. If your controller is powered via the fan (EC1, for example), use an active cable. If your controller plugs into the wall, non-active does the job.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTwo-fan setup (intake and exhaust)\u003c\/strong\u003e\u003cbr\u003e\nUse a Y-splitter cable to connect both fans to one controller socket. Run one size smaller on intake to create negative pressure. Simple and clean—no extra sockets needed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eExtended runs\u003c\/strong\u003e\u003cbr\u003e\n5 metres is the standard. If you need to go longer, extension cables and balancer setups exist. Worth asking about your exact room layout before you buy—too long and you risk signal loss.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eActive vs. non-active—the decision\u003c\/strong\u003e\u003cbr\u003e\nCheck your controller first. EC5, EC1, and EC Fan Speed Controller? Active cable required. Enviro Controller or AC-EC? Either works, but active is more flexible. When in doubt, active covers you.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard length:\u003c\/strong\u003e 5 metres (male-to-male)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type:\u003c\/strong\u003e Male connectors on both ends (fans and controllers have female sockets)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive cables:\u003c\/strong\u003e Three pins connected, includes power line from fan to controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-active cables:\u003c\/strong\u003e Data transmission only, controller requires separate mains power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable variants available:\u003c\/strong\u003e Male-to-male, Y-splitter (one controller to two fans), extension cables (female-to-female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible fans:\u003c\/strong\u003e Vector EC (all models), Hyper Fan V2 (with supplied RJ11 or 3-pin converter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible controllers:\u003c\/strong\u003e EC1, EC5, EC Fan Speed Controller, Enviro Controller, AC-EC, plus most G.A.S digital fan control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal standard:\u003c\/strong\u003e Digital EC control (Modbus RTU) or analogue 0-10V depending on controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowers building a digital extraction system for the first time and needing to know which cable actually does what\u003c\/li\u003e\n\u003cli\u003eAnyone upgrading from manual fan speed controls to digital climate control\u003c\/li\u003e\n\u003cli\u003eMulti-fan setups where you need to run intake and exhaust as a balanced pair\u003c\/li\u003e\n\u003cli\u003eGrowers who want to reduce mains socket clutter using active cables powered through the fan\u003c\/li\u003e\n\u003cli\u003eExperienced growers adding more fans to an existing controller without running extra power cables across the room\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eDigital fan control sounds more complicated than it is, but cable selection matters. G.A.S has built a proper range here—active, non-active, Y-splitters, extensions—which means you can actually build the system your room needs instead of making do with what fits.\u003c\/p\u003e\n\u003cp\u003eThe active vs. non-active thing is worth getting right first time. Five minutes checking your controller spec now saves you swapping cables later. Worth picking up the right cable while you're setting up your extraction. Makes the difference between a system that just works and one that keeps you guessing.\u003c\/p\u003e\n\n\u003c\/section\u003e","brand":"GAS UK","offers":[{"title":"Non-Active Y to 5ml Male Cable (Pack 1)","offer_id":47916611502250,"sku":"133379","price":24.49,"currency_code":"GBP","in_stock":true},{"title":"5m Non-Active Male to Male (Pack 2)","offer_id":47916611535018,"sku":"133356","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Non-Active Y-Splitter (Pack 3)","offer_id":47916611567786,"sku":"133357","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"2m Balancer Extension (Pack 4)","offer_id":47916611600554,"sku":"133360","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"5m Active Male to Male (Pack 8)","offer_id":47916611633322,"sku":"133364","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Active Y-Splitter (Pack 9)","offer_id":47916611666090,"sku":"133366","price":16.99,"currency_code":"GBP","in_stock":true},{"title":"Active Female to Female Extension (Pack 11)","offer_id":47916611698858,"sku":"126268","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Terminator Cable (Pack 13)","offer_id":47916611731626,"sku":"133365","price":5.99,"currency_code":"GBP","in_stock":false},{"title":"GAS Controller to Phresh Hyperfan V2 (Pack 16)","offer_id":47916611764394,"sku":"133305","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/5540\/5400\/files\/133356_1_7fba0518-ff03-4937-9efc-91a4678003c2.jpg?v=1769197170"},{"product_id":"gn-telos-cables-and-h-connector","title":"GN Telos Cables, Connectors and Spares","description":"\u003csection class=\"gh-product-listing\"\u003e\n\n\u003ch2\u003eGN Telos Cables, Connectors and Spares — Waterproof Power Distribution for Daisy-Chained LED Grow Lights\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e Growers running multiple Telos LED fixtures who need reliable power consolidation and remote driver placement\u003c\/p\u003e\n\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003e\nIf you've got multiple Telos lights, these cables and connectors aren't optional—they're essential. Built with proper IP66-rated Wieland connectors and a locking mechanism that actually works, this is the kit that keeps your multi-light setup running without faffing about. Does exactly what it should, day in, day out.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eGN Telos Cables, Connectors and Spares are the backbone of any multi-light Telos setup. These \u003cstrong\u003ewaterproof power distribution cables\u003c\/strong\u003e let you daisy-chain multiple Telos LED grow lights from a single mains socket, complete with \u003cstrong\u003eIP66-rated green-coded connectors\u003c\/strong\u003e and \u003cstrong\u003eh-block splitter connectors\u003c\/strong\u003e that lock securely and won't accidentally disconnect mid-cycle. Whether you're consolidating power across your grow room or relocating your driver unit to manage heat, this system handles the heavy lifting so you don't have to.\u003c\/p\u003e\n\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eTelos connectors sit apart from generic alternatives in meaningful ways.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Wieland connectors\u003c\/strong\u003e with mechanical locking—stays watertight even at connection points, unlike loose-fit alternatives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower distribution focus\u003c\/strong\u003e—designed specifically to handle multiple fixture power draws from one socket, not just control signals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher daisy-chain capacity\u003c\/strong\u003e—supports up to 12 × Telos 0006, 10 × Telos 0008, or 8 × Telos 0010 from a single outlet (competitors typically max at 4 units)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote driver cable option\u003c\/strong\u003e—lets you run the driver up to 3 metres away, solving head height and heat issues without rewiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn short: proper kit for growers serious about multi-light setups.\u003c\/p\u003e\n\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDaisy-chaining multiple fixtures\u003c\/strong\u003e\u003cbr\u003e\nUse the AC Link Cable to feed mains power into your first Telos light, then use the h-connector splitter to chain additional units together. Each connection locks into place—push connectors together until the arrow on the locking ring points to the \"open padlock\" symbol, then twist the ring until it shows the \"locked padlock.\" One wall socket powers the whole chain.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRemote driver placement\u003c\/strong\u003e\u003cbr\u003e\nIf your driver unit is mounted on top of the light and you want to run it outside the grow space for cooler room temperatures, use the Remote Driver Cable to extend the distance. The driver can sit up to 3 metres away from the fixture without performance loss. You'll need to carefully remove the two metal locking straps holding the driver to the light (metal snips work for this).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePower management\u003c\/strong\u003e\u003cbr\u003e\nRespect the daisy-chain limits—don't exceed 8 × Telos 0010, 10 × Telos 0008, or 12 × Telos 0006 from one 13A socket. Overloading causes nuisance trips and downtime.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConnector maintenance\u003c\/strong\u003e\u003cbr\u003e\nKeep connectors dry and free of debris. The locking mechanism is robust, but it's only effective if you're actually using it—always lock connectors, always check they're seated properly before running cycle.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type:\u003c\/strong\u003e Wieland h-block splitter connectors with mechanical locking mechanism\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating:\u003c\/strong\u003e IP66 (waterproof and dustproof, rated for water jets)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable coding:\u003c\/strong\u003e Green-coded power feed for safety identification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote driver cable length:\u003c\/strong\u003e Up to 3 metres maximum safe distance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum daisy-chain capacity:\u003c\/strong\u003e 12 × Telos 0006, 10 × Telos 0008, or 8 × Telos 0010 per single 13A mains outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking mechanism:\u003c\/strong\u003e Twist-lock ring with \"open\" and \"closed\" padlock position indicators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Telos 0006, Telos 0008, Telos 0010 LED grow light fixtures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowers running 2+ Telos lights who need to consolidate power and reduce mains socket clutter\u003c\/li\u003e\n\u003cli\u003eCommercial horticultural operations expanding multi-light setups without expensive rewiring\u003c\/li\u003e\n\u003cli\u003eGrowers optimising grow room temperature by placing drivers outside the canopy space\u003c\/li\u003e\n\u003cli\u003eAnyone building a networked Telos lighting system that runs 12-18 hours daily and needs zero downtime\u003c\/li\u003e\n\u003cli\u003eUK-based indoor farmers prioritising British-engineered components and reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLess relevant if you're running a single Telos light—you don't need these cables as a standalone purchase.\u003c\/p\u003e\n\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eThese aren't flashy accessories, but they're the difference between a tidy, scalable multi-light system and a rats' nest of extension cables and bodged connections. The Wieland locking connectors are genuinely well-engineered—you're getting industrial-grade components that don't fail mid-cycle.\u003c\/p\u003e\n\u003cp\u003eIf you've got multiple Telos fixtures or you're planning to expand, good time to buy while stock lasts. Proper kit at a sensible price that'll outlast cheaper alternatives by years.\u003c\/p\u003e\n\n\u003c\/section\u003e","brand":"TELOS","offers":[{"title":"H-Connector","offer_id":47916619235498,"sku":"181610","price":19.99,"currency_code":"GBP","in_stock":false},{"title":"Universal System Link Cable (2m)","offer_id":47916619268266,"sku":"3643","price":19.99,"currency_code":"GBP","in_stock":true},{"title":"Telos 6 Driver (Non-Mesh)","offer_id":47916619301034,"sku":"5868","price":79.99,"currency_code":"GBP","in_stock":true},{"title":"Telos 10 Driver (Non-Mesh)","offer_id":47916619333802,"sku":"5866","price":139.99,"currency_code":"GBP","in_stock":false},{"title":"Telos 6 Driver (Mesh)","offer_id":47916619366570,"sku":"6158","price":99.99,"currency_code":"GBP","in_stock":false},{"title":"Telos 10 Driver (Mesh)","offer_id":47916619399338,"sku":"181630","price":119.99,"currency_code":"GBP","in_stock":true},{"title":"Telos Universal Power Cable","offer_id":47916619432106,"sku":"5591","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0053\/5540\/5400\/files\/181620_-_ac_system_cable_2m_1_cc33822d-0fe7-45ac-9886-47782476a02b.jpg?v=1769197391"},{"product_id":"g-a-s-5m-male-cable-used-with-the-gavita-master-controller-el1f-el2f","title":"G.A.S 5m Male Cable - Used with the Gavita Master Controller EL1F \u0026 EL2F","description":"\u003csection class=\"gh-product-listing\"\u003e\n\n\u003ch2\u003eG.A.S 5m Male Cable - Link Your Gavita Controller to Your Fan\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e Growers running a Gavita EL1F or EL2F Master Controller who need to connect a digital or EC fan to the controller's fan-control port.\u003c\/p\u003e\n\n\u003cdiv class=\"gh-our-thoughts\" role=\"note\" aria-label=\"Our thoughts\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOur thoughts\u003c\/strong\u003e\u003cbr\u003e\nGavita's EL1F and EL2F controllers are brilliant for running lights and a fan off one box, but only if you've got the right cable to link them. This is that cable - a straightforward 5-metre lead that plugs the controller into your fan, no adapters or soldering needed.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eThis is a 5-metre male control cable that connects the fan-control output on a Gavita EL1F or EL2F Master Controller directly to a compatible digital or EC fan. Because the EL1F and EL2F have their own dedicated mains power supply, they only need a non-active cable to carry fan-speed commands rather than power itself, so the cable's job is simply to extend that control signal.\u003c\/p\u003e\n\n\u003cp\u003eFive metres of cable gives you enough slack to position the fan wherever the ducting run actually needs it, without forcing the controller to sit right next to the fan.\u003c\/p\u003e\n\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eIt's a specific accessory cable rather than a generic lead, and that specificity matters when it comes to fitting the right connector.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVs the cable that may ship with certain fan models: this is a dedicated, correctly rated 5m replacement or extension made specifically for the EL1F\/EL2F fan-control port\u003c\/li\u003e\n\u003cli\u003eVs generic third-party control cables: made to work directly with Gavita's fan-control connector, so there's no adapter needed\u003c\/li\u003e\n\u003cli\u003eVs the Gavita temperature probe extension cable: a different accessory entirely, that one extends the temperature sensor rather than fan control, worth not confusing the two when ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere's no real alternative here beyond the manufacturer's own cable, but at this price it's not something to overthink.\u003c\/p\u003e\n\n\u003ch3\u003eUsage guidance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSingle fan setup\u003c\/strong\u003e\u003cbr\u003ePlug one end into the EL1F\/EL2F fan-control port and the other into your digital fan's control input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRunning two fans\u003c\/strong\u003e\u003cbr\u003eYou'll additionally need a female-to-female extension and a Y-splitter alongside a second 5m male cable - the controller can drive multiple fans from one port with the right splitter setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable routing\u003c\/strong\u003e\u003cbr\u003e5m is usually enough to route around a tent or small room without the controller needing to sit right next to the fan itself.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: \u003cstrong\u003e5m\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnector: \u003cstrong\u003emale, for Gavita fan-control port\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: \u003cstrong\u003enon-active (control signal only, no mains power carried)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible controllers: \u003cstrong\u003eGavita EL1F, EL2F Master Controller\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTypical use: \u003cstrong\u003elinking Master Controller to a digital or EC-compatible extraction fan\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowers running a Gavita EL1F or EL2F Master Controller\u003c\/li\u003e\n\u003cli\u003eAnyone needing to position their fan further from the controller than the standard lead allows\u003c\/li\u003e\n\u003cli\u003eGrowers building a multi-fan setup off one Master Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOur take\u003c\/h3\u003e\n\u003cp\u003eIf you're running a Gavita EL1F or EL2F and your fan sits further away than the standard lead reaches, this is the straightforward fix rather than an extension cobbled together from the wrong connector type.\u003c\/p\u003e\n\u003cp\u003eSmall, specific, and does exactly what it should, day in, day out.\u003c\/p\u003e\n\n\u003c\/section\u003e","brand":"Growers House ","offers":[{"title":"Default Title","offer_id":48003236364458,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}]}],"url":"https:\/\/growershouse.co.uk\/collections\/grow-light-cables-accessories.oembed","provider":"Growers House ","version":"1.0","type":"link"}